Tech-Protect Glass Fit+ 2-Set Tempered Glass for DJI Osmo Action 6

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen while maintaining full touch sensitivity.

A 9H hardness rating on a scale of 10 means the glass can withstand contact with keys, coins, and other sharp objects. At just 0.3 mm thick, it barely changes its profile or impacts the screen's responsiveness. The tempered material disperses impact force, protecting the display from cracks during drops.

The oleophobic coating minimizes fingerprints and makes the glass easy to keep clean. Crystal clarity preserves natural colors and image sharpness.

• 100% Original
• Packed in original packaging
• Glass hardness 9H
• Only 0.3 mm thick
• Oleophobic coating to reduce fingerprints
• Precisely milled edges

2 × Tech-Protect Glass Fit+ large display glass

2 × Tech-Protect Glass Fit+ small display glass

2 × Tech-Protect Glass Fit+ lens glass

2 × Installation kit

1. Start the installation in the bathroom right after taking a bath – the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.

2. Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.

3. Install the cover as evenly as you can – you can position it using two pieces of tape, sticking them to the side of the device.

4. Eliminate any air bubbles by pressing firmly in circular motions for several seconds. This ensures the adhesive bonds as strongly as possible to the screen.